Raypak LONMARK Y-200 Manual do Utilizador descarregar pdf (Página 8)

otes:

. Tighten terminal strip clamping screws to 2.5 in-

lbs. Breakage from over-torquing is not covered

under warranty.

. Use stranded copper conductors only. For supply

connections, use wires sized on the basis of 60°C

(140°F) ampacity and rated a minimum 90°C

(194°F).

3. Install disconnect for each control unit.

Fig. 3: Wiring Diagram

. For external building control or thermostat control,

remove wiring to J6 (CHF) connector and activate

with 12 to 28 VAC.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Sem comentários

Raypak LONMARK Y-200 Manual do Utilizador Página 8